BASTL

View as Ruudukko Luettelo

5 tuotetta

Aseta nousevaan järjestykseen
per sivu
  1. Bastl ABC
    Bastl
    ABC

    Simple Six Channel Signal Mixer


    ABC is a simple 6 channel signal mixer. It has 6 inputs - A, B, C, D, E, and F - and two outputs - A+B+C - which is mixed into the D+E+F output if nothing is inserted in the A+B+C jack. ABC is designed to mix audio signals but can be modified to mix CV signals instead. There are 6 solder jumpers on the backside, which can be connected to turn the ABC mix into a CV mixer.

    Simple yet versatile:
    ABC mixes mono, stereo, or CV signals



    There are also 3 jumpers on the backside which can be used to normalize inputs A to D, B to E, and C to F. This is useful if you would like to use the ABC mix as a 3 channel stereo mixer (using both outputs and having separate volume control for left and right channel). Lisätietoja
    118,00 €
  2. Bastl Buddy
    Bastl
    Buddy
    Preamp stereo mixer

    Buddy is a four-channel eurorack stereo mixer optimized for hybrid setups. Channels A and B are optimized for eurorack sources (either mono or stereo) with a slight boost (×2 / +6dB). Channels C and D are line-level pre-amps that can boost the signal up to ×10 / +20dB and feature stereo TRS jack inputs for directly connecting desktop units without further adaptors. All channels feature a clean boost via the high-quality, low-noise NE5532 op-amp, which delivers smooth overdrive - that can be used to overdrive clean stereo signals. Several Buddy mixers can be chained via jumper cables on the back to expand the number of channels without losing precious inputs. Lisätietoja
    155,00 €
  3. Bastl Ciao!
    Bastl
    Ciao!
    Bastl Ciao! tarjoaa neljä korkealaatuista linjalähtöä kompaktissa koossa. Kuulokekuunteluun voidaan nopeasti ohjata jompi kumpi stereokanavista. Live-käytössä on mahdollista rakentaa soundi valmiiksi kuulokekuuntelussa, ja ohjata se sitten uloslähtevään miksaukseen kytkintä kääntämällä. Yliohjausta osoittavat ledit auttavat pitämään signaalitasot kohdillaan. Huomioi moduulin mitat! 6.3mm liittimien vuoksi moduulin syvyys on 55mm. Moduulin korkeus on 113,5mm, eikä se sovi kaikkiin Eurorack-koteloihin. Muista tarkistaa casen mitat ennen tilausta! Lisätietoja
    166,00 €
  4. Bastl Kompas
    Bastl
    Kompas

    Probability trigger generator



    Kompas is a three-coordinate probabilistic pattern navigator. Each coordinate has a unique traveling pace and a dedicated trigger output. The amount of probability can be adjusted manually or by external voltages. Once a coordinate has been adjusted, a new pattern is generated and looped until the next change of direction.

    This tool is the outcome of the environment we are in


    And is inspired by the non-linear approach to music and life – don't build any expectations, choose your direction, and discover new paths

    Unlike common probability operation, instead of filtering a pre-determined sequence, Kompas uses probability to generate new looping patterns based on the direction you choose. Lisätietoja
    159,00 €
  5. Bastl Timber
    Bastl
    Timber

    Dual Waveform Lumberjack



    Timber is a very flexible wave shaping module that can produce rich timbres by adding harmonics to simple waveforms (triangles and sinewaves) or any other signal. It has 2 different unique wave shaping circuits, the WAVE DRIVER (I) and the WAVE FOLDER (II), and a voltage-controlled crossfader to fade between the specific circuits or between one of them and the clean input signal.m

    Novel take on the Serge style wave folding circuit & more...



    Both circuits share the same control voltages: the SHAPE, which sets the input amplification before the wave shaping circuit, and the SYMMETRY control, which adds voltage offset to the input signal to provide various asymmetric overdrives or wave folding sounds. There is also voltage FBK CV jack, which, when provided with positive voltages, feeds a respective portion of the output signal back to the input, which results in chaotic and aggressive behaviors. It is calibrated to work well with 5V gate voltages.

    The WAVE DRIVER (I) is an overdrive circuit with one folding stage, and it has 2 configuration 3-way switches (9 different configurations). The drive switch can set the overdrive character to SOFT or HARD or something in between. The FOLD switch can set the folding threshold to HI or LO, or it can turn the folding stage off in the NO position.

    The WAVE FOLDER (II) is a novel take on the serge style wave folding circuit, which has specific behavior to abuse the high gain of the input amplification stage to provide rich high-frequency timbres with higher settings of the SHAPE parameter. It has a configuration switch that can either activate a clean 4 stage wave folding in the OK position or a highly asymmetric folding stage in the KO position that provides a strange metallic character. The NO position provides only the very last overdrive-folding stage. Lisätietoja
    218,00 €
per sivu